PE115F
- Appearance
- Super dry white flake, without black spots
- Density
- 0.92 - 0.94 g/cm3
- Flash Point
- min 170 °C
- Penetration Index
- 3 - 6 (0.1 mm)
- Viscosity @ 140 °C
- 10 - 30 cP
BHD Chemical, a division of BHD Group, supplies PE wax (polyethylene wax) against a published technical data sheet. The specification table covers density, flash point, needle penetration and viscosity. PE wax is part of a wax range led by paraffin wax, petroleum jelly and slack wax. All orders are quoted on request, and buyers can ask for the full data sheet.
BHD Chemical is a PE wax supplier within BHD Group, one accountable house with two divisions: BHD Chemical and BHD Sourcing. Our PE wax is supplied against a published technical data sheet: density 0.92 - 0.94 g/cm3, flash point min 170 °C, penetration 3 - 6 0.1 mm and viscosity 10 - 30 cP. It is quoted on request. To get a quote, send your volume, packaging and delivery destination. You can also ask for the full data sheet before you order.
PE wax (polyethylene wax) from BHD Chemical, supplied against a published technical data sheet and quoted on request. It sits in our wax range beside paraffin wax, petroleum jelly and slack wax, so you can buy several waxes from one accountable house. We state the spec plainly, supply on spec and on time, and give you one contact from quote to delivery.
Grades
PE120F
- Appearance
- Super dry white flake, without black spots
- Density
- 0.92 - 0.94 g/cm3
- Flash Point
- min 180 °C
- Penetration Index
- 3 - 4 (0.1 mm)
- Viscosity @ 140 °C
- 10 - 30 cP
PE120P
- Appearance
- Powdered polyethylene wax, snow white
- Density
- 0.92 - 0.94 g/cm3
- Flash Point
- min 180 °C
- Penetration Index
- 3 - 4 (0.1 mm)
- Viscosity @ 140 °C
- 10 - 30 cP
PE370
- Appearance
- Snow white, without black spots
- Density
- 0.82 - 0.85 g/cm3
- Flash Point
- min 130 °C
- Penetration Index
- 15 - 20 (0.1 mm)
- Viscosity @ 140 °C
- 20 - 50 cP
PE380
- Appearance
- Dry, snow white, without black spots
- Density
- 0.85 - 0.89 g/cm3
- Flash Point
- min 140 °C
- Penetration Index
- 5 - 6 (0.1 mm)
- Viscosity @ 140 °C
- 10 - 30 cP
Specification by grade
| Grade | Appearance | Density | Flash Point | Penetration Index | Viscosity @ 140 °C |
|---|---|---|---|---|---|
| PE115F | Super dry white flake, without black spots | 0.92 - 0.94 g/cm3 | min 170 °C | 3 - 6 (0.1 mm) | 10 - 30 cP |
| PE120F | Super dry white flake, without black spots | 0.92 - 0.94 g/cm3 | min 180 °C | 3 - 4 (0.1 mm) | 10 - 30 cP |
| PE120P | Powdered polyethylene wax, snow white | 0.92 - 0.94 g/cm3 | min 180 °C | 3 - 4 (0.1 mm) | 10 - 30 cP |
| PE370 | Snow white, without black spots | 0.82 - 0.85 g/cm3 | min 130 °C | 15 - 20 (0.1 mm) | 20 - 50 cP |
| PE380 | Dry, snow white, without black spots | 0.85 - 0.89 g/cm3 | min 140 °C | 5 - 6 (0.1 mm) | 10 - 30 cP |
Key characteristics
Supplied against a published technical data sheet with stated units
Density, flash point, penetration and viscosity all set out for incoming-goods checks
Available in the same order as paraffin wax, petroleum jelly and slack wax
Handled by BHD Chemical, with one accountable contact from quote to delivery
Quoted to your volume, packaging and destination, with terms we can keep
PE wax from an accountable supplier
If you are looking for a PE wax supplier, start with the specification. BHD Chemical publishes the values it supplies against: density, flash point, needle penetration and viscosity. The table on this page lists each one with its unit, taken from our PE wax technical data sheet.
PE wax is part of our wider wax range. Our main products are paraffin wax, petroleum jelly and slack wax. Distributors and blenders who already buy those from us can add PE wax to the same order and deal with the same contact.
Two divisions, one house
BHD Group trades through two divisions, BHD Chemical and BHD Sourcing. PE wax is handled by BHD Chemical. Whichever division supplies you, one house is accountable for the spec you agreed, the volume you ordered and the date we committed to.
Specification and documentation
Technical evaluators can check our PE wax against their incoming-goods spec before they commit. We publish four properties: density in g/cm3, flash point in °C, needle penetration in 0.1 mm and viscosity in cP. Ask for the full technical data sheet and we will send it with your quote or on its own.
How we handle quality documents
Every value we quote comes from the named data sheet. If you need a figure that is not on it, ask us. We will tell you what can be documented for your batch. We will not estimate a value we cannot support.
Packaging, volume and delivery
We quote each PE wax order separately. Packaging, minimum order and lead time depend on your volume, your destination and the Incoterms you want. Tell us these when you ask for a quote. We will reply with terms we can keep, not a figure picked just to win the order.
Request a PE wax quote
Send us your volume, packaging and delivery destination and we will prepare a quote. If you are building a wax range, name the other products you want too, such as paraffin wax or slack wax. You can see the full catalogue on our products page.
Waxes
- PE Wax PE115F — Technical Data Sheet (TDS), EN (Revised: Rev. 1 · July 2026)
- PE Wax PE120F — Technical Data Sheet (TDS), EN (Revised: Rev. 1 · July 2026)
- PE Wax PE120P — Technical Data Sheet (TDS), EN (Revised: Rev. 1 · July 2026)
- PE Wax PE370 — Technical Data Sheet (TDS), EN (Revised: Rev. 1 · July 2026)
- PE Wax PE380 — Technical Data Sheet (TDS), EN (Revised: Rev. 1 · July 2026)
- PE Wax — Safety Data Sheet (SDS), EN (Revised: Revision 1 · Issue date: August 2026)
CoA supplied per shipment.
Frequently asked questions
What specification does BHD's PE wax have?
Our technical data sheet gives density of 0.92 - 0.94 g/cm3, flash point of min 170 °C, penetration of 3 - 6 0.1 mm and viscosity of 10 - 30 cP. We can send you the full data sheet on request.
What is the minimum order quantity?
It depends on your order, so we set it in each quote. Tell us your volume, packaging and destination and we will state the minimum order in our reply.
What packaging and lead times are available?
Both are quoted for each order, based on your volume, destination and Incoterms. We commit only to dates we can keep.
Can I buy PE wax together with other waxes?
Yes. PE wax is part of BHD Chemical's wax range with paraffin wax, petroleum jelly and slack wax. You can request them in one quote from one accountable house.
What documents come with a shipment?
Tell us which documents your incoming-goods check needs when you ask for a quote. We will confirm what we can provide for your batch before you order.
If the grade you need is not listed here, tell us the specification and volume and BHD Sourcing will find it — request a quote.
Why buyers work with BHD Group
Two divisions operate under a single accountable house. There is no handoff between a trading desk and a sourcing desk that leaves a buyer chasing an answer — one team owns the order from enquiry to delivery.
AboutSend your spec, tonnage and delivery date — we reply with what is available, on spec and on time. Request a quote